Confirming Locks in SG-DSR Manager App

This topic covers editing lock settings and alarm priorities in the SG-DSR Manager App.

 

 

NOTES & PREREQUISITES

  1. The ASSA Locks must be installed, configured, and connected to the DSR Server. more ...Closed if you need to verify locks connected to the DSR Server refer to Verifying Lock Connections. 

  2. The DSR Assa Abloy Service must be running on the DSR Server.

  3. The GCSWeb API Service must be running on the Galaxy Communication Server.

  4. You must have logged into the SG-Manager App using a master-level login.

  5. You must have added the DSR Server to the SG-DSR Managerand saved it as "active" status.

  6. IMPORTANT: Wifi Locks must be actively connected to pick up the confirmation, thus you will need to issue a wake command to confirm the Wifi locks individually.

 

 

 

 

IMPORT & CONFIRM LOCKS (in SG-DSR Manager App)

 

  • Launch the SG-DSR Manager app as needed and sign in with a valid SG Operator login.

 

  1. Select the Access Points tab to begin.

  2. Click the [Refresh from DSR] button - to import the unconfirmed Assa Locks/Readers.


    TIP: Locks will come in as unconfirmed if you are creating a DSR for the first time. In future, only new locks will come in as unconfirmed. Confirmed locks will also come in if this is not the first time you have edited your DSR.

  3. There are two ways to confirm your locks ...

    1. Confirm a Single Lock: Select (click on) an unconfirmed lock (row) and click the Confirm button in the "Confirm" column to confirm a single lock and Click SAVE in the Action Field. IMPORTANT: You may need to issue the wake command to a wifi lock to get the confirmation to succeed. more ....Closed issue a wake command at the WIFI lock by entering #323232 on keypad, or pressing the COMM button on the inside of reader head, or by presenting a Wake Card. Note: the "Confirmed" indicator will change from red to green when the lock is confirmed. This will also insert the lock into the SG Assa Lock Table

    2. Confirm All Locks: Click the [Confirm All Locks] button in the Toolbar to confirm all Locks.
      Note: the "Confirmed" indicator will change from red to green when the lock is confirmed. This will also insert the lock into the SG Assa Lock Table.

  4. Once you have confirmed the lock you can edit the lock settings or alarm priorities as appropriate.

  5. Click SAVE button in the "Action" field on the same row as your Lock - to save all changes.

    TIP: you may need to click it twice. if the button does not disable, it means your click did not trigger the save. Sometimes the click only brings the focus to the field and you must click a second time to actually depress the save button.

  6. Click the [Upload Access Points] button to push saved changes to the DSR Server and Locks.

    Note: IP Locks will get their changes promptly and WiFi Locks will pick up their changes the next time they are connected (1 day or less). To force Wifi Locks to pick up changes more ...Closedissue a wake command at the WIFI lock by entering #323232 on keypad, or pressing the COMM button on the inside of reader head, or by presenting a Wake Card.

 

 

Next Steps ...

Topics listed in sequential order.

 

Return to QUICK STEPS

Return to ADD A DSR SERVER

(Import & Confirm Locks)

EDIT LOCKS AND ALARMS  

 

Additional Steps ...

CREATE TIME SCHEDULES

CREATE AUTHORIZATION PRIVILEGES

CREATE ACCESS POINT MODES

CREATE LOCK GROUPS

ENROLL CARDS / USERS (done in System Galaxy)

User Functions ...

View Alarms

View Reports

View Users

 

< RETURN TO FAQS & REQUIREMENTS